10 Reasons – Stand Up Paddleboard is better than a kayak

1) Perspective:

On a kayak, you sit. On a stand-up board–you stand. From standing you can just see so much more. Wildlife in the water around you, waves coming in on the horizon—standing just gives you a better perspective. And, if you are tired you can just SIT down, or even lay down. You can do yoga poses on a SUP. Can you do downward facing dog on your kayak? I don’t think so.

2) Overall Workout:

With a stand-up board, you have to balance. Just the simple act of balancing engages all of your core muscles (think: abs, butt, legs). Once you add in the paddling aspect, you are then working out your upper body–arms, waist and obliques. The standing and the paddling combined gives a workout of your complete musculature system. Any type of SUPing you chose, flatwater, racing, or surfing will be fun and a great all-around workout.

3) We already sit too much.

Research shows that sitting is very bad for our health. We sit in our offices, our cars, in our homes—do we really want to sit while exercising too? Like I mentioned, in points, #1 and #2, stand up paddling gives our muscles a workout but gives us the flexibility to take a break when we need.

4) Surfing!

Yes, you can surf with a kayak but it is nothing like traditional surfing. With a SUP, you can catch smaller waves quicker–giving you time to make the first section, allowing for longer rides. And, for places like the Gulf of Mexico, where bigger waves are few and far between, the SUP can be used to hone your surfing skills for when the waves arrive or your annual surfing trip to Hawaii. From standing, you can also see the sets rolling in much better (and farther out) than from sitting. Surfing on stand up board is amazing!

5) You can do it anywhere!

Just like kayaking, SUPing can be done anywhere there is water. There are people who do whitewater SUPing, SUP surfing, long distance SUP, and more. Right now flat water SUPing is popping up all over the place–lakes, rivers, swimming pools, bays–in Alaska, Patagonia, Hawaii, and Sarasota–everywhere.

6) It is much easier to get going.

Most SUP boards are light enough to be carried by yourself. Grab your board, your paddle and your leash and get in the water. By the time the kayak folks get in the water, you will be halfway done with your workout.

7) Gaining in Popularity

It has been said that SUP is the fastest growing water sport in the world–and for good reason. And, because of the popularity, there has been lots of research into the technology behind it. The equipment is getting better and better and the sport is being tested in new and interesting places.

8) Racing

SUP races have been popping up all over the place. And, why not jump on a SUP to do a paddling race? Not only will it be fun, you will likely meet some interesting and like-minded people.

9) If you fall off, its easier to get back on a SUP.

First, a disclaimer–of all the people we have recently taken out SUPing in flatwater–NONE of them have fallen in. This includes kids, older athletes and scared old ladies. However, if they had fallen off they would have been able to easily get themselves back up on the board. The same is not true of a kayak. Once you roll a kayak, it is very difficult to get back in–especially if you are by yourself.

10)Fun!

We are big believers in the idea that your workout should be fun. You shouldn’t dread getting outside and moving around. You should be super excited about it. SUPing will give you that. I know that kayaking is also fun–but with all of the lugging the kayaks around, getting set up and organized–the fun factor gets watered down. A stand-up board is easy to handle (#6) and gets you out on the water for an amazing workout (#2) with excellent visuals (#1) in no time.

11) You Look Cool

I know I said 10 reasons but 11 is kinda cool for a good reason when you’re on a crowded beach and you see someone out in the uncrowded ocean having fun, personly I’m jealous and I think that’s cool working on the tan good fitness and you look cool, who doesn’t want to be the cool person at the beach? exactly!

There is a reason that SUPing is considered the fastest growing water sport in the world. You have to try it!

TOP TIPS To Help Make Your Wetsuit Last Longer!!!

Although its the quickest way to dry your suit for the next session, hanging it up in direct sunlight means a shorter life for your neoprene. 

Next to buying a new board, investing in a fresh wetsuit is one of the most expensive purchases a surfer will make in a given year. With most new suits retailing above £300, you want your investment to last. We rang up Joanne Huebner of Froghouse Surfshop in Newport Beach for advice on extending the life of your rubber. With more than 20 years of experience repairing neoprene, she knows how to get your suit through another winter.

Fit Matters:

Having a comfortable suit that fits will not only make for a better session but can also extend the life of your suit. “If your wetsuit doesn’t fit properly, you’re not only going to be uncomfortable, but you’re going to be slowly ruining your suit as well,” says Joanne. “If your suit is too small, you’re constantly stretching it out further than it should, putting tension on the seams and rubber that will lead to holes and tears.”

Dry it in the Shade:

One of the absolute worst things you can do for your suit is to leave it in the sun. “It’ll dry out all of the rubber and shrink it up, which means you’re gonna start creating some holes and tears. Dry your suit out in the garage or in your shower, but never leave it to dry out in the sun.”

Don’t let it Rot:

One of the quickest ways to shorten the life expectancy of your suit is to wad it up and throw it in your trunk. Not only will your car smell like a gas station urinal the next time you get in, but if left soaking wet for too long, the rubber in the suit will begin to deteriorate. When you do hang your suit, don’t hang it wet over a hanger. “If your suit is soaking wet and you hang it on a regular small hanger, you’re actually stretching it out. The weight of the wet rubber will pull at the legs and stretch out the suit, creating tension in the shoulders that can lead to tears and holes. Drape your suit over something wide so there’s no tension pulling at any part of the suit.”

Desalinate:

The salt from the ocean can be one of the biggest factors in killing your suit. After each session, wash it off in fresh water, inside and out. “I’ve seen a lot of people bring in their suits and you can tell that they’re not washing it all the way off and only doing it halfway. You’ll see that the ankles and other places that they didn’t clean will start to tear.”

Kill the smell:

If your suit’s grown a bit ripe and no amount of freshwater rinsing seems to do the trick, there’s still hope. Fill up your bathtub with warm water and add a splash of Woolite. “That seems to help out a lot if your suit gets too stinky,” adds Joanne. “But keep in mind one of the worst things you can do is to throw it in the washing machine. If you just soak it in the tub with Woolite, that’ll do the trick.”

Utilize The Warranty:

Shit happens. Zippers break, seams tear, holes abound. Despite taking the utmost care for your suit, problems will inevitably arise. Fortunately, most good suits come with a warranty. Use it. “Most people that come to me for repairs come in with problems that could have been fixed with their warranty, but they waited too long,” says Joanne. “When you get a new wetsuit, take note of the seems zippers, knee patches and leg holes. Most of the problems can be replaced by the company. Just save the warranty card and your receipt.”

HOT TO CUT & FIX A SUP PADDLE

How To Cut and Fix a SUP Paddle Together

This is a how to guide for how to cut an SBS fixed length paddle fallow the guide step by step or watch the video to create your perfect paddle.

Supplies Needed:

* Hacksaw         * Masking Tape        * Sanding Block         * Medium Grit Sandpaper         * Tape Measure        

  * Fine Tip Permanent Marker      * Dust Mask (Optional)       * 5 Minute Epoxy        * Stir Stick     * Mixing Tray

1) To measure paddle length, stand the paddle Upright next to you with the tip of the blade touching the ground.

2) Using a fine tip permanent marker, mark a line on the shaft where you will make the cut.

WARNING: Make sure to compensate for the additional length with the handle installed.

3) Wrap a strip of masking tape around the shaft where you put your mark to prevent splintering while cutting.

4) Using the hacksaw, cut the shaft. Note: Paddle length is a personal preference. We recommend the total paddle length to be approximately 8” to 12” above head level, including the additional length with the handle installed.

* A longer length shaft is recommended for racing and flat water cruising.

* A shorter length shaft is recommended for wave riding.

5). Using the sanding block, sand the end of the shaft flat and smooth out the edge. Remove the masking tape

Handle & Blade Installation

1) Using the mixing tray and stir stick, mix the epoxy thoroughly. And insert heat shrinking loop over paddle shaft

2) Coat the inside of the handle with the epoxy. Repeat this stage with the blade

3) Insert the handle onto the shaft. Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.

4). Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.

 5) Once the handle has dried, drip a bead of epoxy around handle connection to prevent leakage. Wipe off any excess resin

6) Slide heat shrinking loop over blade and shaft connection and apply heat until tight

After this, your paddle should be complete and ready to youse, have fun and see you in the water.