HOW TO WAX A SURFBOARD 

 

Wax has been used for years to help surfers gain traction and grip to their surfboards in water. Traditionally a surfboard is quit slippery in the water and without wax or traction pads I would be difficult to paddle and ride. Most surfboards have a thin layer of wax on the deck. Surf wax applied correctly will create a layer of small waxy bumps giving your feet a grip/traction

The following is a beginner’s guide to waxing your board as well as a tutorial of how to get the perfect traction for your board If you’ve never waxed a surfboard before or you’re just looking for tips to get a better wax job, here is our guide to waxing your surfboard.

Wax types

Choosing the right wax for the job is key depending on the size of the board as well as the temperature of the water will determine what wax you need tropical water, warm water, cool water & cold water are your usual wax names if  you take a cold water wax to warm water, it will be too soft.  But you could use a warm water wax in cold water, but it’s better to get what you need.In the UK the average temperature varies from around 4 C in winter to around 15 C in summer. There for you will need to possible change your wax in the summer and winter. But most of the year Cold water wax is perfect

Wax temperature guide below

How To Wax A Surfboard In 5 Steps

Step 1: What You Will Need 

To wax your surfboard The main thing you will need is some wax remover/white spirit/a rag or cloth/ basecoat wax, topcoat wax and a wax combe

Step 2: Clean The Surfboard 

When starting to wax a surfboard you need to remove any debris, dirt or previous wax to ensure the surfboard is clean to ensure you get proper adherence. If your surfboard is brand new follow step 4

First take the wax combe and start scrape off all of the wax with the straight side of your wax comb. It helps if the wax can be heated up or the board left in the sun to aid this process. Ensure that you remove all wax from rails nose tail & deck using the curved and flat sides of the combe

 

You will still have a small amount of wax on the board so you will need to use wax remover cleaning product or white spirit that will dissolve any excess wax. Gently rub a cloth over the area to ensure all the wax is gone & wash off the cleaning solution with water.

Step 3 Where To Put Wax On Your Surfboard

The picture below shows a rough guide of were to apply your wax on different types of the surfboard. Other areas include around the rails were you grip the board for duck diving and also all the way to the nose. Also, try to keep any wax off the bottom of your board as that will slow it down making your board less responsive.

Step 4: Applying The Basecoat

The basecoat is the foundation of your grip basecoat wax is harder than top coat and will last longer on your board. It also makes it harder to apply so will require a strong amount of pressure. It will help to create a pattern of bumps on your surfboard that helps the top cote stick easier. The base coat will help to keep your wax on for longer were as applying just topcoat would need to be applied constantly.

Begin by applying broad strokes on the board and continuing until you see a bump pattern emerge. Each surfer is different so try a range of patterns and styles of waxing that works for you

 

Its a good idea is to start off with criss crosses by going diagonal one way up the board and then go perpendicular to that direction back down the board. Its then a good idea to fill on those criss crosses by either

Front to Back: Rub the wax in a straight line parallel to the rocker and to keep grip when duck diving apply a small amount on the rails close to the nose

Circles: Rub the wax in little circles, moving up and down the board

Front to Back: Rub the wax in a straight line parallel to the rocker and to keep grip when duck diving apply a small amount on the rails close to the nose

Random: doing circular, straight, side to side in a random directions. After doing this for a few minutes “if properly performed “you will see small bumps and lumps begin to appear. Ensure to keep waxing until you have an even and suitable layer of wax.

Step 5: Top Coat 

Now it’s time to apply the top coat of wax. Usually a lot softer in texture and greatly affected by heat changes and water temperature

The top coat is applied in the same way as the basecoat but with less pressure as the wax is softer. Use a similar technique.

 

Keep your wax sticky for longer 

Once you finished your surf you will want to prepare your wax for the next session. Wax will enviable flake off and get stuck to your wetsuit body and shorts, therefor to keep your board at maximum grip you will need to reapply small amount of top coat before each session. The wax will eventually get flatter and less sticky a great tip if you haven’t got any wax or want a little more grip use the jagged side of a wax combe to scratch some lines in the wax to reveal the fresher wax underneath this will help your wax go further

 

If you surf a lot and find your wax isn’t doing its job it’s a good idea to go back to the beginning and start a fresh basecoat. On average a new basecoat should be applied every year but if you surf a lot every 3-4 months might be ideal.

Related Posts

Unleash Ultimate Performance on any Wave SUP

Unleash Ultimate Performance on any Wave SUP

Unleash Ultimate Performance on any Wave SUPThe War Bird is a dedicated wave SUP for when the surf is pumping. This board is everything you want in a wave SUP, precision turning, easy wave catching and great fun to paddle. It’s designed for paddlers who can already...

UP Your Surf Sup Game Right Now !

UP Your Surf Sup Game Right Now !

Up Your Surf SUP Game With The Widow MakerThe widow maker is our performance surf SUP designed for high-end performance wave riding. It has a short overall length compared with most other SUPS which allows it to fit perfectly in the pocket of the wave with ease. 1...

The Ultimate in Flat Water Racing SUP

The Ultimate in Flat Water Racing SUP

Out Ultimate Flat Water Racer Stad Up Paddleboard The Long Bow is the ultimate race developed at the hight level, with only podium placed in sight 1 Who is it For If your a seasoned sup paddler who likes distance or speed this caters for both of those, a full 3k...

Our Legendary Touring / Cruiser SUP

Our Legendary Touring / Cruiser SUP

Our Legendary Touring / Cruiser SUPThe Don is our big board for big distances, great for touring, fitness, and racing. Its all-around streamline design is perfect for flat-water performance, recreational users as well as open ocean long distance competitors looking...

The Stable Fun Allround SUP

The Stable Fun Allround SUP

The Stable Fun Allround SUPThe Big Rocket is our all-round cruiser and wave SUP perfect for a first time paddler or recreational users as well as intermediates looking for a SUP for the waves. This board offers the best combination of speed, stability and wave...

The Perfect Family Paddleboard

The Perfect Family Paddleboard

The Perfect Family Stand Up Paddleboard Sup is our all-around Stand Up Paddleboard for flat water and small waves really popular with family’s, beginners and wave surfers. and if you have a family then its going to be fun for the whole family days at the beach will...

Subscribe To Our Newsletter

Join our mailing list to receive the latest new, updates & offers from our team.

You have Successfully Subscribed!

[]
×
GET £10 OFF YOUR ORDER

Get a discount in your email!