HOT TO CUT & FIX A SUP PADDLE
How To Cut and Fix a SUP Paddle Together
This is a how to guide for how to cut an SBS fixed length paddle fallow the guide step by step or watch the video to create your perfect paddle.
Supplies Needed:
* Hacksaw * Masking Tape * Sanding Block * Medium Grit Sandpaper * Tape Measure
* Fine Tip Permanent Marker * Dust Mask (Optional) * 5 Minute Epoxy * Stir Stick * Mixing Tray
1) To measure paddle length, stand the paddle Upright next to you with the tip of the blade touching the ground.
2) Using a fine tip permanent marker, mark a line on the shaft where you will make the cut.
WARNING: Make sure to compensate for the additional length with the handle installed.
3) Wrap a strip of masking tape around the shaft where you put your mark to prevent splintering while cutting.
4) Using the hacksaw, cut the shaft. Note: Paddle length is a personal preference. We recommend the total paddle length to be approximately 8” to 12” above head level, including the additional length with the handle installed.
* A longer length shaft is recommended for racing and flat water cruising.
* A shorter length shaft is recommended for wave riding.
5). Using the sanding block, sand the end of the shaft flat and smooth out the edge. Remove the masking tape
Handle & Blade Installation
1) Using the mixing tray and stir stick, mix the epoxy thoroughly. And insert heat shrinking loop over paddle shaft
2) Coat the inside of the handle with the epoxy. Repeat this stage with the blade
3) Insert the handle onto the shaft. Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
4). Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
5) Once the handle has dried, drip a bead of epoxy around handle connection to prevent leakage. Wipe off any excess resin
6) Slide heat shrinking loop over blade and shaft connection and apply heat until tight
After this, your paddle should be complete and ready to youse, have fun and see you in the water.
Related Posts
Unleash Ultimate Performance on any Wave SUP
Unleash Ultimate Performance on any Wave SUPThe War Bird is a dedicated wave SUP for when the surf is pumping. This board is everything you want in a wave SUP, precision turning, easy wave catching and great fun to paddle. It’s designed for paddlers who can already...
UP Your Surf Sup Game Right Now !
Up Your Surf SUP Game With The Widow MakerThe widow maker is our performance surf SUP designed for high-end performance wave riding. It has a short overall length compared with most other SUPS which allows it to fit perfectly in the pocket of the wave with ease. 1...
The Ultimate in Flat Water Racing SUP
Out Ultimate Flat Water Racer Stad Up Paddleboard The Long Bow is the ultimate race developed at the hight level, with only podium placed in sight 1 Who is it For If your a seasoned sup paddler who likes distance or speed this caters for both of those, a full 3k...
Our Legendary Touring / Cruiser SUP
Our Legendary Touring / Cruiser SUPThe Don is our big board for big distances, great for touring, fitness, and racing. Its all-around streamline design is perfect for flat-water performance, recreational users as well as open ocean long distance competitors looking...
The Stable Fun Allround SUP
The Stable Fun Allround SUPThe Big Rocket is our all-round cruiser and wave SUP perfect for a first time paddler or recreational users as well as intermediates looking for a SUP for the waves. This board offers the best combination of speed, stability and wave...
The Perfect Family Paddleboard
The Perfect Family Stand Up Paddleboard Sup is our all-around Stand Up Paddleboard for flat water and small waves really popular with family’s, beginners and wave surfers. and if you have a family then its going to be fun for the whole family days at the beach will...
