HOT TO CUT & FIX A SUP PADDLE
How To Cut and Fix a SUP Paddle Together
This is a how to guide for how to cut an SBS fixed length paddle fallow the guide step by step or watch the video to create your perfect paddle.
Supplies Needed:
* Hacksaw * Masking Tape * Sanding Block * Medium Grit Sandpaper * Tape Measure
* Fine Tip Permanent Marker * Dust Mask (Optional) * 5 Minute Epoxy * Stir Stick * Mixing Tray
1) To measure paddle length, stand the paddle Upright next to you with the tip of the blade touching the ground.
2) Using a fine tip permanent marker, mark a line on the shaft where you will make the cut.
WARNING: Make sure to compensate for the additional length with the handle installed.
3) Wrap a strip of masking tape around the shaft where you put your mark to prevent splintering while cutting.
4) Using the hacksaw, cut the shaft. Note: Paddle length is a personal preference. We recommend the total paddle length to be approximately 8” to 12” above head level, including the additional length with the handle installed.
* A longer length shaft is recommended for racing and flat water cruising.
* A shorter length shaft is recommended for wave riding.
5). Using the sanding block, sand the end of the shaft flat and smooth out the edge. Remove the masking tape
Handle & Blade Installation
1) Using the mixing tray and stir stick, mix the epoxy thoroughly. And insert heat shrinking loop over paddle shaft
2) Coat the inside of the handle with the epoxy. Repeat this stage with the blade
3) Insert the handle onto the shaft. Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
4). Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
5) Once the handle has dried, drip a bead of epoxy around handle connection to prevent leakage. Wipe off any excess resin
6) Slide heat shrinking loop over blade and shaft connection and apply heat until tight
After this, your paddle should be complete and ready to youse, have fun and see you in the water.
Related Posts
WHY KELLY’S WAVE POOLS WONT WORK !!!
WHY KELLY’S WAVE POOLS WONT WORK !!!Why kelly slaters wave pools won't work !!! Team rider Jack picks the pros and cons to kelly slaters wave pool idea in his brand new surf talk feature on his channel. understanding the progressions of waves pools and the...
4 Reasons Going Vegan Can Help Your Surfing
4 Reasons Going Vegan Can Help Your Surfing “Let food be thy medicine and medicine be thy food.” ~ Hippocrates Whether you’re a pro surfer or your average joe we all want to get better at surfing, improving is name of the game and having a blast whilst you do. Eating...
Why Are So Many Pro Surfers Going Vegan ?
Why Are So Many Pro Surfers Going Vegan? If you’re in the know, you might see a lot of our favourite world tour pro surfer posting more pictures of smoothie bowls and hashtagging the words vegan in their Instagram post. You might not really care or even bother what...
Hunting for Waves With The Predator Surfboard
The Predator is our ultimate wave catching board in almost any size wave. It can be surfed in knee high waves to well overhead fully barreling surf and still paddle like an absolute dream helping you get in earlier in the big stuff and plane quicker in small waves....
The Bull “Small Waves Big Fun”
The Bull “Small Waves Big Fun” The Bull is our super fun small wave surfboard that sits right in between out spud stick and our motivator shortboard slight more refined than our spud stick in outline 1 Packed Full Of Volume The Bull is our most fun shortboard to date...
Top 5 WORST Wipeouts Of All Time
5 Insane WipeoutsWe've all been there paddling out in some sketch or big condition and the set comes we are in the spot paddling with your heart in your mouth and boom we taking off everything seems like it was meant to be and boom we catch a rail...
