HOT TO CUT & FIX A SUP PADDLE
How To Cut and Fix a SUP Paddle Together
This is a how to guide for how to cut an SBS fixed length paddle fallow the guide step by step or watch the video to create your perfect paddle.
Supplies Needed:
* Hacksaw * Masking Tape * Sanding Block * Medium Grit Sandpaper * Tape Measure
* Fine Tip Permanent Marker * Dust Mask (Optional) * 5 Minute Epoxy * Stir Stick * Mixing Tray
1) To measure paddle length, stand the paddle Upright next to you with the tip of the blade touching the ground.
2) Using a fine tip permanent marker, mark a line on the shaft where you will make the cut.
WARNING: Make sure to compensate for the additional length with the handle installed.
3) Wrap a strip of masking tape around the shaft where you put your mark to prevent splintering while cutting.
4) Using the hacksaw, cut the shaft. Note: Paddle length is a personal preference. We recommend the total paddle length to be approximately 8” to 12” above head level, including the additional length with the handle installed.
* A longer length shaft is recommended for racing and flat water cruising.
* A shorter length shaft is recommended for wave riding.
5). Using the sanding block, sand the end of the shaft flat and smooth out the edge. Remove the masking tape
Handle & Blade Installation
1) Using the mixing tray and stir stick, mix the epoxy thoroughly. And insert heat shrinking loop over paddle shaft
2) Coat the inside of the handle with the epoxy. Repeat this stage with the blade
3) Insert the handle onto the shaft. Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
4). Line up the flat side of the handle with the outward facing blade while the epoxy is still wet.
5) Once the handle has dried, drip a bead of epoxy around handle connection to prevent leakage. Wipe off any excess resin
6) Slide heat shrinking loop over blade and shaft connection and apply heat until tight
After this, your paddle should be complete and ready to youse, have fun and see you in the water.
Related Posts
How To Pop Up On A Surfboard
Beginners guide to pop up How to pop up Learning the pop up is one of the most basic and vital movement that you will perform every time you go surfing making sure that you technique is good is critical to the start of every wave but also your progression....
!!! TOP 10 Most Influential Surfers of All Time !!!
Top 10 most influential surfers of all time From surfing’s early beginnings as the “Sport of Kings” in Hawaii, it has held a certain sway over spectators and participants alike. While estimates of the number of surfers worldwide vary wildly (from 5 million to 23...
Surfing – With No Surfboard (Absolutely Stunning)
Surfing - With No Surfboard (Absolutely Stunning) there are no other words for it that this vides make surfing look even cooler than we thought it already was. Take away the surfboard and show this to any of your friends who want to know what surfing feels like...
10 Waves To Surf Before You Die
The Top 10 Waves To Surf Before You DieBarra De La Cruz When: April—October Where: “Barra” as it’s called, is located 30 minutes from Huatulco in Oaxaca, Mexico. Why: Unveiled to the surfing world during the epic Rip Curl Search event years ago, with ideal wind, swell...
10 Health Benefits of Stand Up Paddleboarding …
10 Health Benefits of Stand Up Paddleboarding As we know to stand up paddle boarding is a pretty great sport from racing to wave riding it allows young and old to experience the ocean in a variety of forms. Not only is paddle boarding good for our stoke but it...
THE SECRETS OF SURF PHOTOGRAPHY
The Secrets of Surf Photography Subject: when your photographing surfing you want to convey something in your photos? wave shape, surfing style, spray from turns, and above all, you want a connection with the surfer in the shot.This is tricky if you're 100m away from...
